E-LOCK® – Works on several Quick Release Brackets by Minn Kota


Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

DuraSafe is excited to announce an alternative use for the E-LOCK®. It can now be used on a number of Minn Kota Quick Release Brackets to lock up your bow mount trolling motor.

Fits Models: MKA-16-02, MKA-16-03, MKA-42, MKA-52/62 & MKA-47 

Does NOT Fit Models: MKA-21, MKA-23, RTA-17, RTA-19 & MKA-22


In stock

Category: SKU: UEL50-QR


Quick release brackets are a popular option to easily attach or remove the trolling motor from the boat. These brackets also make it easy for a thief to tamper with your trolling motor. By replacing the factory side screw of the bracket with an E-LOCK® the bracket and your motor are protected. Once installed the E-LOCK® prevents the bracket from sliding forward securing your motor to the bracket.

The E-LOCK® differs from a standard padlock because it sits flush to the bracket, making it impossible to cut off. Nothing is exposed. In addition, a padlock can damage the boat from the rattling and jarring that is created when your boat is underway. E-LOCK®’s smooth, circular design prevents any damage to the boat making it the best option available.

Product Features

  • Replaces factory site screw to prevent removal of bracket

  • Flush mounted to offer unparalleled security

  • Designed to eliminate scratches and damage a padlock causes from rattling around

  • Can be keyed to several other DuraSafe Locks for added one-key convenience

Additional information

Weight.375 lbs
Dimensions8 x 5 x 2.25 in

Install Instructions

1. Remove lock from package. Insert key and turn counter-clockwise to allow inner piece of lock body to drop out. Then turn key back clockwise so it is in the locked position 2. Place one medium washer on “C” screw and feed both washer and screw through hole of inner piece of lock body so the screw is protruding out of the lock body 3. Remove existing factory side screw from Quick Release Bracket and remove the factory washers 4. Place the factory washers over screw protruding out from inner piece of lock body 5. Screw inner piece of lock body into thumb screw hole of the quick release bracket and tighten 6. Install outer piece of the lock body and be sure it’s secure by pulling back

1 review for E-LOCK® – Works on several Quick Release Brackets by Minn Kota

  1. Rated 5 out of 5

    Tom (verified owner)

    Excellent product , easy to install and super fast shipping.
    Thanks .

Add a review

Your email address will not be published. Required fields are marked *

Post comment